Wintech Digital Systems Technology Corp.

Products Where to Buy Support & Service About Wintech
 
Products 
Videophone Development Platform (VDP) 
DaVinci based videophone/ videoconference Development Platform(VDP2)
D1 Resolutin Video Development Platform (HD-VDP)
Videophone based on DM643 (SV2000)
Economical TDS560 Emulator(TDS560USB-EC) 
TDS510PCMCIA Emulator 
TDS560USB Real-Time Emulator 
TDS510USB2.0 JTAG Emulator 
 

TDS560USB Real-Time Emulator

- Key Benefits
- Main Features
- What's Included
- Installation Requirements
- Supports Operating Systems
- Selection/Product Guides

The TDS560USB Real-Time Emulator is a new generation of emulator for real-time debugging. It not only supports high speed real-time data exchange (HS-RTDX), but can help you decrease your project time. The emulator itself is a USB device that is fully plug and play compatible and supports high speed code download. The TDS560USB Real-Time Emulator is designed to operate with TI Code Composer Studio IDE debug tool and is compatible with Windows 98SE / 2000 / XP.


Key Benefits

  • High speed real-time data exchange (HS-RTDX) bandwidth over 2Mb/s, real-time event sequence server without stopping the application.
  • Increases code download speed up to 8x faster than XDS510.
  • USB compatible, simple connection, fully Plug-and-Play, no jumpers, no switch settings.

Main Features

  • TDS560USB Real-Time EmulatorReal-time data exchange (RTDX) bandwidth over 2Mb/s and real-time event sequence server without stopping the application
  • Increases code download speed up to 8x faster than XDS510
  • USB compatible, simple connection, fully Plug-and-Play, no jumpers, no switch settings
  • Hot pluggable
  • Supports multiprocessor debugging of same or different type
  • Programmable TCK: 500KHz to 35MHz
  • Compatible with XDS510
  • Overall cable/pod length of 6ft (1.5m)
  • Hardware detection of power losses and cable disconnections
  • Wide dynamic operating voltage: 1.0 to 5.0 volts
  • All pod signals are ESD protected
  • Supports Texas Instruments (TI) DSP with a JTAG (IEEE 1149.1) interface: C2000, F2400, C27X, F28X, C54X, C55X, C6000, C64X, TMS470 (ARM) and OMAP platforms
  • Supports Texas Instruments Code Composer Studio 3.2 and the older version

What's Included

  • TDS560USB Real-Time Emulator and Pod
  • USB interface cable
  • Five Volt DC power supply
  • AC power cord
  • The TDS560USB driver disk
  • TDS560SB Real-Time Emulator Installation Guide Reference Guide

Installation Requirements

  • Code Composer Studio IDE 2.0 or greater
  • A free USB port ( USB2.0 is recommended)
  • 500MHz or higher Pentium-compatible CPU (900MHz or higher Pentium III CPU or equivalent is recommended)
  • Local CD-ROM drive

Supports Operating Systems

  • Windows 98SE (SP1) / Win2000 (SP4) / WinXP (SP1)

Selection/Product Guides

All rights reserved © 1996-2005 Wintech Digital Systems Technology Corp.